折疊手動扭剪扳手工作原理

來源：http://hkystar.com日期：2024-03-30 發布人：創始人

扭剪扳手主要是緊固扭剪型高強螺栓的，它的目的就是把扭剪型高強螺栓的梅花頭打斷即可。工作時將扳手頭對準螺栓頭，扣動開關即可開始工作，幾秒后，螺栓梅花頭將被扭斷，然后抽出扳手扣動扳機將梅花頭彈出，即結束工作。

The torsion wrench is mainly used to tighten torsion shear high-strength bolts, and its purpose is to break the plum blossom head of the torsion shear high-strength bolt. When working, align the wrench head with the bolt head, press the switch to start working. After a few seconds, the bolt ring head will be twisted and broken. Then, pull out the wrench and pull the trigger to eject the ring head, which ends the work.

旋轉型電動扭剪扳手

Rotating electric torsion wrench

旋轉型電動扭剪扳手是扭剪扳手的一種，工作頭與手柄連接位置設計了旋轉機構，工作頭可以相對手柄位置做360度水平旋轉。

The rotary electric torsion wrench is a type of torsion wrench, and a rotating mechanism is designed at the connection position between the working head and the handle. The working head can rotate 360 degrees horizontally relative to the position of the handle.